In Stock Outdoor Lights

Our collection of in-stock outdoor lighting brings together design-led fittings currently available for gardens, terraces, entrances, pathways and exterior walls. From wall lights and garden spotlights to bollards, pendants and portable lamps, each design provides a considered way to extend useful illumination beyond the interior.

Good outdoor lighting should improve visibility without overwhelming the landscape. It can guide movement, illuminate entrances, define dining and seating areas or draw attention to planting and architectural details. The most effective schemes use several carefully positioned light sources rather than relying on one excessively bright fitting.

These in-stock outdoor lights include contemporary and traditional designs in brass, bronze, copper, galvanised metal, glass and powder-coated finishes. Each product should be selected according to its intended location, IP rating, materials, light output and installation requirements.

Explore our full collection of designer outdoor lighting if your project is not restricted to fittings currently shown as in stock.

Planning a layered outdoor lighting scheme

Outdoor spaces contain different zones and each requires a different type of light. Entrances need clear visibility, paths and steps require guidance, and dining areas benefit from softer illumination that supports conversation without creating glare.

Begin by identifying the routes and areas that will be used after dark. Light the front door, gates, changes in level and frequently used paths first. Additional fittings can then highlight planting, walls, trees or other features.

Avoid trying to illuminate the entire garden evenly. Carefully controlled areas of light and shadow create depth and allow the character of the landscape to remain visible. Overlighting can make an exterior feel flat, disturb neighbouring properties and reduce the atmosphere around seating areas.

Separate switching or control zones provide flexibility. Path lights can operate independently from dining, security and accent lighting, allowing only the required fittings to be used.

Outdoor wall lights

Exterior wall lights provide practical illumination beside doors, gates, garages and terraces. They can also establish rhythm along the elevation of a building and reveal the texture of brick, stone, timber or render.

A downlight directs illumination towards the ground and can help define a route or entrance. An uplight emphasises the wall and architecture, while an up-and-down fitting creates a balanced pattern in both directions.

Bulkheads and box lights provide a more enclosed form that suits entrances and working areas. Lantern-inspired designs bring a traditional presence, while compact geometric fittings work well with contemporary architecture.

Position the light so that it illuminates the required area without shining directly into the eyes of people approaching the property. Window positions and neighbouring buildings should also be considered.

Browse our collection of outdoor wall lights for fittings designed to provide practical and architectural exterior illumination.

Lighting paths and steps

Paths, steps and changes in ground level should remain visible after dark. Low-level lighting can define the route without introducing the glare of a powerful overhead source.

Bollards, recessed fittings and shielded path lights direct illumination towards the ground. Their spacing should respond to corners, steps and changes in direction rather than following an arbitrary repeated measurement.

The aim is to reveal the route clearly while preserving some contrast. Too many closely positioned fittings can make the landscape feel overdesigned and may create unnecessary brightness.

Materials and planting should be included in the plan. Foliage may grow across a beam, while gravel, pale paving and dark stone all reflect different amounts of light. Drainage and ground conditions must also be considered when selecting and installing recessed or spike-mounted fittings.

Explore our path and step lights for focused illumination around walkways, terraces and changes in level.

Garden spotlights and planting

Outdoor spotlights can highlight trees, planting, sculptures and architectural details. Adjustable spike lights are particularly flexible because their position and direction can be refined as the garden develops.

A narrow beam creates a concentrated effect on a trunk, sculpture or vertical feature. A wider beam illuminates a larger section of planting or wall. The distance between the fitting and the subject will also affect the spread and intensity.

Consider the direction from which the garden will be viewed. A spotlight should usually face away from the house or main seating position to prevent the source from causing glare. The beam should illuminate the feature rather than people walking through the space.

Natural growth may change the effect over time. Leaves and branches can obstruct the light, so spike fittings may need occasional repositioning to maintain the intended result.

In-stock outdoor table lights

Outdoor table lights create an intimate layer of illumination across dining and occasional tables. Their smaller scale makes them useful for meals, conversation and relaxed evenings on a terrace or balcony.

Rechargeable designs remove the need for a cable across the table and can be moved as the layout changes. Many offer several brightness settings, allowing the output to move between functional and atmospheric light.

Check the lamp’s dimensions in relation to the table. It should provide useful illumination without obstructing views between guests. A shaded or diffused source will generally feel more comfortable at eye level than an exposed bright bulb.

Discover our collection of outdoor table lights for portable and decorative designs suited to exterior dining and seating areas.

Portable outdoor lamps

Portable outdoor lights offer flexibility across gardens, patios and balconies. They can be moved between a dining table, side table and seating area without requiring a fixed electrical point.

Battery life varies according to the product and brightness setting. Higher output generally uses the battery more quickly, while a lower level may provide illumination for a longer period. Charging methods and times also differ between designs.

Portable does not automatically mean weatherproof. The product’s IP rating and specification must confirm that it is suitable for outdoor use. Some lights can tolerate splashes or rain but should not be left exposed permanently or submerged.

Browse our rechargeable outdoor lamps for movable lighting designed for suitable exterior settings.

Outdoor pendant lights

An outdoor pendant can define a covered dining table, porch or sheltered seating area. Its suspended form adds a more decorative layer and can visually connect an exterior entertaining space with the interior.

Ceiling height and drop must be considered carefully. The pendant should sit low enough to illuminate the intended surface but high enough to preserve clear views and movement. Wind exposure is also important, particularly in open-sided structures.

A covered position does not automatically make an indoor pendant suitable for exterior use. Moisture, condensation and temperature changes can still affect the fitting. Only products with specifications appropriate for the proposed location should be installed.

Explore our collection of outdoor pendant lights for covered terraces, porches and exterior entertaining areas.

Outdoor floor lamps

Outdoor floor lamps bring the scale and atmosphere of indoor lighting to terraces, balconies and garden seating areas. They can define a lounge arrangement and provide a comfortable layer of light around sofas and chairs.

Freestanding fittings should be positioned on a stable surface and protected from being knocked or overturned. The cable, where present, must not cross a walkway or create a trip hazard. Rechargeable designs may offer greater flexibility where fixed power is unavailable.

The size and proportions should relate to the furniture and surrounding space. A tall lamp can anchor a large seating arrangement, while a smaller design may be better suited to a balcony or compact terrace.

Browse our collection of outdoor floor lights for freestanding illumination around exterior living areas.

Understanding IP ratings

An IP rating indicates a fitting’s level of protection against the ingress of solid particles and moisture. Outdoor lights require a rating appropriate for their position and degree of exposure.

A fitting installed beneath a substantial covered porch experiences different conditions from one exposed to driving rain or installed close to the ground. The IP rating, construction and manufacturer’s instructions should all be considered.

A higher IP rating does not automatically make a product suitable for every exterior location. Coastal air, standing water, irrigation, extreme temperatures and ground conditions may require additional consideration.

The individual finish should also be checked. Some products are available in several finishes, and suitability can differ between variants. Electrical work and fixed exterior lighting should be planned and installed by a suitably qualified professional.

Materials for exterior lighting

Outdoor-light materials change as they are exposed to weather. Brass, bronze and copper can develop a natural patina, which alters the surface colour over time. This ageing is often part of the character of the material rather than a defect.

Galvanised and powder-coated finishes provide different levels of protection, while stainless steel grades vary in their suitability for particular environments. Coastal locations can be especially demanding because salt accelerates corrosion.

Glass protects and diffuses the light source, but it should be cleaned periodically to remove dirt, mineral deposits and organic growth. Seals and fixings should also be inspected as part of routine maintenance.

Follow the care instructions for the chosen material and finish. Abrasive products or unsuitable chemicals may damage protective coatings and increase the risk of corrosion.

Light colour, brightness and glare

Warm white light is generally effective around gardens and terraces because it complements timber, brick, stone and planting. It also creates a more relaxed atmosphere around dining and seating areas.

A neutral white source can provide greater clarity around working or security-focused areas, although an excessively cool light may feel harsh in a residential garden.

Brightness should be selected according to purpose. A path light requires enough output to reveal the route, while a spotlight used on a tree may need a different beam and intensity. A table lamp can be much softer because it is positioned close to the users.

Shielded fittings, controlled beams and careful positioning help reduce glare. Outdoor lighting should illuminate the intended surface without unnecessarily directing light into windows, neighbouring properties or the sky.

Sensors, timers and lighting controls

Some outdoor wall lights include motion sensors, while other fittings can be connected to separate controls. Sensor lighting can provide convenient illumination near entrances, side passages and frequently used routes.

The detection range, direction and duration should be adjusted to the setting. A poorly positioned sensor may be triggered repeatedly by pedestrians, animals, traffic or moving planting.

Timers and smart controls can organise different exterior-lighting zones and prevent lights from remaining on unnecessarily. Any control system must be compatible with the fittings, drivers and electrical circuit.

For decorative areas, dimming can provide flexibility, but outdoor dimming requires compatible products and controls specifically suitable for the installation.

Understanding in-stock availability

This collection includes outdoor lighting currently recorded as available. Stock levels can change as orders are placed, and availability may differ between colours, sizes and finishes of the same design.

Review the individual product page for the latest stock status, required quantity and estimated delivery information. A light appearing in the in-stock outdoor lighting collection does not necessarily mean that every version is available.

If a project requires several matching wall, path or pendant lights, check that the required quantity is shown before finalising the layout. Technical suitability, IP rating and dimensions remain important and should not be compromised for faster availability.

In-stock exterior lighting for considered spaces

In-stock garden lighting makes it possible to introduce useful and atmospheric illumination without limiting the scheme to one type of fitting. Wall lights, path lights, spotlights, pendants and portable lamps can work together to reveal the landscape and support outdoor living after dark.

Explore the collection to find in-stock outdoor lighting for entrances, terraces, pathways, balconies and garden seating areas. For lighting throughout the home and garden, browse our wider designer lighting collection.